Apple iPhone 7 is amongst the most beloved iPhones in the world. From the latest software update to a powerful processor, iPhone 7 is a complete package of specifications. Apple-designed that device with a sleek and premium infrastructure similar to its previous version. Besides a beautiful design, iPhone 7 comes with an HD retina display for a better viewing experience. It features a vivid IPS display with 1334×750 pixel resolution and a 1400:1 contrast ratio. Despite its mind-blowing specifications, iPhone 7 screen is prone to develop severe cracks if it hits a hard surface. There are frequently asked questions by all the iPhone 7 users, Can we repair our device by ourselves? The answer is definitely yes. You can easily fix an iPhone 7 screen by yourself at your home. All you need to do is to follow a step by step procedure as discussed below.
Steps to replace a cracked iPhone screen with a newer one:
1. Turn off the device:
It is the primary step of every mobile repairing procedure. You cannot repair a device, especially the iPhone, without switching it off. Before you proceed further in the process of iPhone 7 screen replacement, turn off your iPhone by holding the power button. Be patient and wait for the iPhone to switch off properly. Your device must be switched off throughout the screen replacement process. Never try to turn your device on during the replacement to prevent yourself from short circuits.
2. Collect repairing tools:
An iPhone consists of various screws, and you need specific screwdrivers to unscrew the device. You cannot unscrew an iPhone without professional screwdrivers. First, buy a pentalobe screwdriver with five faces. I will help you in unscrewing the bottom screws. After that, buy a screwdriver to open 3×1.0 mm Y-Type screws of the battery connector.
3. Unscrew the device:
As you collected the necessary tools, it is time to unscrew the device. Start unscrewing your iPhone 7 from the bottom. You will find two pentalobe screws. Unscrew them using the pentalobe screwdriver you had collected. Now, kept aside both the screw carefully and make sure you do not misplace any of them. In case you lost an original pentalobe screw, you will not be able to reassemble your device.
4. Pull out the screen:
Your iPhone’s screen stays fixed with an adhesive. Cover your iPhone with transparent tape and apply heat on its corners. It will melt out the adhesive between the back panel and screen digitizer. Now you can pull out your iPhone screen using a hard plastic pick. Gently pull out the screen and proceed further in the process to iPhone 7 screen replacement.
5. Detach connectors:
After pulling the screen out, you can detach the screen from the device. Detach the battery connector by unscrewing 3×1.0 mm Y-Type screws. You will find four Y-type screws. Unscrew them with a Y-type screwdriver and put them aside for future use. As discussed above, never misplace any screws after unscrewing them. I suggest you should pool all the screws in a plate so that you can use them afterward.
6. Detach other components:
An iPhone includes but is not limited to connectors only. You need to detach many other components such as earpiece, face time cable set, home button, etc. After removing them, unscrew the 6 Y-type screws you see on the heat shield plate. Remove the heat shield plate and keep it aside from the display unit safely.
7. Insert new screen digitizer:
Now your device is ready to replace the screen digitizer with a newer one. Remove all the seals from the new display and peel off its protective film. If you bought an original Apple screen digitizer, then it is well and good. In case you bought the screen digitizer manufactured by a local brand, compare it with the older one. You can proceed further in the process of iPhone 7 screen replacement if both the displays are the same.
8. Reattach the components:
Once you prepared the screen digitizer, it is time to reverse the whole process. Reattach all the components in the similar way you detached them. Tight up all the screws with specific screwdrivers and reattach all the hardware components accurately.
9. Apply adhesive:
As you know, you had melted out the screen adhesive earlier. You need to apply adhesive in the same way to fix the screen digitizer with the back panel. Now start to fix the screen with hard plastic picks gently. I suggest you should slide the display towards the sleep button to hook the lugs properly. In the end, tight up both the pentalobe screws and gently press the phone for a proper fix.
10. Turn on the device:
Your device is now ready to turn on. Turn on your iPhone from the power button and give it some time to configure with the new screen digitizer. After that, use your iPhone for a long time and check whether the touch screen is working properly or not.
Conclusion:
Apple iPhones are known its beautiful retina display worldwide. Following the legacy, iPhone 7 comes with a stunning IPS LCD retina panel with 1344×750 resolution. Most mobile users accidentally drop their device on a hard surface and get it broken. If you are one of them, you can easily repair your iPhone 7 by following above discussed procedure. The iPhone 7 screen replacement process aims to guide you with step-by-step instructions for repairing your device. Meanwhile, make sure you strictly follow each step for expected results. Visit – Esource Parts
